INFPT
6-Digit Alphanumeric Display
Configurable Via Front Panel Pushbuttons
and/or Via RS-232 of RS-485
8 Built-In Time Bases
Resolution to 0.01 Sec
Count Up or Down Modes
Four Isolated Open Collector Outputs
Five Controller Output Modes
Time of Day Clock
Battery BackupûOptional |
|
The INFPT multifunctional
panel meter is designed to be set up as a clock/timer controller or stopwatch.
The unit contains eight different time bases and has a built-in date function.
The meter employs five controller output modes, which enable the user
to set up the unit to virtually any timer control application.
The INFPT is perfectly suited for life cycle testing, turning four
loads on and off based on timing cycle. The clock time base is derived
from the 50 or 60 Hz power line and from the internal crystal oscillator.
Front-panel pushbuttons provide a convenient means of configuration and
access to the meterÆs many features. These features can also be accessed
through RS-232 or RS-485 serial communications. The front-panel displays
values and messages with six, 14-segment LEDs.
SPECIFICATIONS
Accuracy: max. error ▒50 ppm over full temp range; Warmup to rated
accuracy: 55 min
Display: 6-digit, 14 segment LED; 14.2 mm (0.56" H): 4 LED outputs
to indicate ON or ACTIVE mode
Display Modes: 12-hour clock, 24-hour clock, 99-day, 99-hour, 99-minute,
999999-hour, 9999.99-hour, 9999.99-minute, 9999.99-sec
TTL Outputs: 4, standard; rated 150 mA at 1 V sink: 30 V open
Relay Outputs (optional): Dual relays, form C, 5 A at 30 Vdc or
230 Vac
Four-Relay Board: Dual 7 amp plus Dual 1 amp form C relays
Power: 115 or 230 Vac ▒ 10%, 49-440 Hz (to 440 Hz with 110 or 220
V min)
Power Consumption: 3 to 10 Watts max.
GENERAL
Input Threshold: 1 V to 3.5 V
Protection Level: 24 Vdc
Connection: Two 3-Socket input plugs
Input Resistance: 30 kohm pull-up resistor to +5 V
Operating Ambient Range: 0 to 50░C (32 to 122░F)
Relative Humidity: 90% at 40░C (non-condensing)
Dimensions: 48 H x 96 W x 156 D mm (1.89" x 3.78" x 6.13")
Panel Cutout: 45 H x 96 W mm (1.772" x3.622"); 1/8 DIN
Weight: 574 g (1.27 lb)
To Order (* Complete Model No.) Prices
Shown in U.S. Dollars
MODEL
INFPT |
( * )
|
( * )
|
( * )
|
( * )
|
INFINITYÖ
Process Timer/Controller |
Price
|
|
|
|
|
Power
& LED Color |
|
0
|
|
|
|
115
Vac power and red LED |
$395
|
1
|
|
|
|
230
Vac power and red LED |
$395
|
2
|
|
|
|
115
Vac power and green LED |
$395
|
3
|
|
|
|
230
Vac power and green LED |
$395
|
|
|
|
|
BCD
& Control
Output(s) |
|
|
0
|
|
|
4
Optically isolated open collector outputs |
Std.
|
|
1
|
|
|
Isolated
parallel BCD outputs |
$110
|
|
2
|
|
|
Dual
7 amp relays |
$75
|
|
3
|
|
|
4
Relay, two 7 amp, two 1 amp |
$175
|
|
|
|
|
Serial
Output(s) |
|
|
|
0
|
|
No
serial output |
Std.
|
|
|
1
|
|
Isolated
RS-232 serial output |
$110
|
|
|
2
|
|
Isolated
RS-485 serial output 110 (includes 6' cable and connectors). |
$110
|
|
|
|
|
Options
and Accessories |
|
|
|
|
BB1
|
Battery
Back-Up |
$85
|
|
|
|
9SC2
|
9-pin
serial connector for RS-232 |
$30
|
|
|
|
9SC4
|
9-pin
serial connector for RS-485 |
$30
|
|
|
|
25SC2
|
25-pin
serial connector for RS-232 |
$30
|
|
|
|
25SC4
|
25-pin
serial connector for RS-485 |
$30
|
Ordering Example:
INFPT-0-0-1 programmable
timer with RS-232C
communications, $395
+ 110 = $505.
|